EC Line EC-2D8380BT, Руководство по программированию

Страница: 5 / 78

3
HID-speed 40 HID-speed 50 HID-speed 60
1, In 2.4G or 433M mode, this parameter is stored in the dongle and defaults is "No delay". When there is no matching dongle, scanning this setting code is invalid.
2, In Bluetooth mode, this parameter is stored in the scanner, the default is "HID-speed 30".
3, In Bluetooth mode,
If the data is lost, please set a slower HID speed.
Upload speed
For storage mode, set the time delay between each barcode, the range of 001-255 can be set. the larger the value, the slower, the defaults is “010”.
Upload-speed 000 Upload-speed 001 Upload-speed 002
Upload-speed 005 Upload-speed 010* Upload-speed 015
Upload-speed 040 Upload-speed 050 Upload-speed 060
Interface setup
Suitable for wired scanner, Dongle, Base.
USB-HID* USB-COM TTL/RS232
Note1
：
It supports 25 languages in USB-HID mode, Please refer to appendix 3.
Note2
：
Dongle and wired-USB mode support USB-HID, USB -COM.
Note3
：
In use, no data is uploaded . It may be set to USB-COM or TTL/RS232.
Dongle indicator light
(1) Blue LED always on means the dongle is normal.
(2) Blue LED flashing means the dongle is broken or the USB port is bad.
Base indicator light
(1) Blue LED always on indicates that the dongle is normal.
(2) Blue LED flashing means the dongle is broken or the USB port is bad.
(3) Green LED always on means the base and scanner are in good contact.
Power and Standby
Battery Reserve (show
battery level)
Shutdown time setting
90s 2min*
5min 30min
60min 166min40s
There are 2 setting codes set for Not shutdown.
Not shutdown Not shutdown-Enabled once Shutdown
Battery level indication
1, The scanner starts, when the buzzer rang “Di-di-di” and the blue light is on with no red light flashing, it indicates that the battery is sufficient.