EC Line EC-1530, Руководство пользователя

Страница: 7 / 24

6
Chapter III: Instructions for use
3.1 Motherboard BIOS settings:
The POS device has a BIOS (Basic Input Output System) chip on the motherboard.
Every time you start the POS devices, the system will first run the BIOS self - test
program, to check the main components of the system to ensure it is working
properly.
The newly assembled POS devices must process the BIOS settings to inform the
entire system configuration of the POS device, so your POS device had done the
BIOS settings in the factory, please do not change the parameters in the BIOS to
avoid system exception if there is no special need.
In the following situations, you need to run the BIOS setup program:
1, Error message appears on the screen during the system self-test, and requested
to enter the BIOS setup program.
a. Press F1 to run setup
b. Press F2 to load default values and continue
2, When the self - test does not appear the information above, if you want to change
the factory default settings based on customer characteristics, boot by DEL to enter
the BIOS interface. If the message disappears before you respond to, you can turn
off the machine or press the Reset button on the front panel, and restart the
computer, you can also press the <Ctrl> + <Alt> + <Del> to restart.
When The POS device is booting, the BIOS runs the self - test program, the self-test
program is a series of diagnostic procedures fixed in the BIOS, when the self-test
program execution is completed, showing the following information:
Press DEL to enter setup (press DEL> key to enter the BIOS setup).
If the message disappears before you respond to, you can turn off the machine or
press the Reset button on the front panel, and restart the computer, you can also
press the <Ctrl> + <Alt> + <Del> to restart.
Control keys
<↑> Move up
<↓> Move down
<←> Move left
<→> Move right
<Enter> To select this option
<Esc> To exit the menu or to return to the main menu from the submenu
<+/PU> Increase the value or change selection
<-/PD> Reduce the value or change selection
<F1> Help, only available in the status menu and select templates menu