Ebyte NA611, Руководство пользователя

Страница: 37 / 41

Chengdu Ebyte Electronic Technology Co.,Ltd.
【
RS485
⇌
WiFi
】
NA611 User Manual
Copyright ©2012–2021
，
Chengdu Ebyte Electronic Technology Co.,Ltd.
28
URL), and name=test&userpwd=123456 is the data received by the device serial port. 192.168.4.10:8080 is the HTTP
server address and port.
Custom protocol header: The default is Connection: keep-alive, which can be modified by the user. If more than one is
needed, add \r\n between the commands, and not add the last one.
If the user passes parameters through POST, the following describes how to use POST. as follows:
POST /request/login.do HTTP/1.1
Host: 192.168.4.10:8080
(The place is a blank line and cannot be deleted. The content of the parentheses in the final release must be deleted,
and the blank line is reserved)
username=test&userpwd=123456
Among them, /request/login.do is the content set in the header path URL, and name=test&userpwd=123456 is the
data received by the device serial port. 192.168.4.10:8080 is the HTTP server address and port.
Custom protocol header: The default is Connection: keep-alive, which can be modified by the user. If more than one is
needed, add \r\n between the commands, and not add the last one.
5.2.3 WebSocket
(1) Log in to the web page, in the mode setting menu, select the work role as Station, select websocket as the service
mode, and save the settings
(2) In the parameter setting menu, configure the required parameters.
5.3 Parameter configuration
5.3.1 Serial port AT instruction configuration
Serial AT command configuration, directly open the serial debugging assistant, set the corresponding baud rate, data
bit, etc.