Ebyte E800-DTU V8 Series, Руководство пользователя

Страница: 12 / 17

Chengdu Ebyte Electronic Technology Co.,Ltd E800-DTU(433Lxx-485)-V8 UserManual
Copyright ©2012–2022
，
Chengdu Ebyte Electronic Technology Co.,Ltd
9
6. Operating mode
There are four operating modes, if low power consumption is not required, it is recommended to configure the
data transceiver for the normal mode (mode 0). The factory default is normal mode (mode 0).
No.
Categories
M0 M1
Description
Mode 0 Normal Mode OFF OFF
Open UART and RF
，
transparent transmission is on
( factory default )
Mode 1
Wake-up
Mode
ON OFF
Transmitting WOR mode, the packet comes with a
preamble code
Mode 2
Power-saving
Mode
OFF ON
Receiving WOR mode, saving receive power, the mode
can not be transmitted
Mode 3 Sleep Mode ON ON Parameter setting using the configuration software
★
Note: no need to care about the wake-up mode (mode 1) and power saving mode (mode 2) if power
consumption is not a problem.
7. Connection diagram when programming
Operating
mode
M1 M0
Description
Configuration
mode
Light on Light on
The DTU can only be programmed using the configuration
software in the current mode
★ Note: 1. Programming can only be done in a specific working mode (see the table above). If the programming