Ebyte E180-Z5812SP, Руководство по эксплуатации продукта

Страница: 21 / 35

Chengdu Ebyte Electronic Technology Co., Ltd. E180-Z5812SP Product Manual
Copyright ©2012–2019,
Chengdu Ebyte Electronic Technology Co., Ltd.
20
open network
send
：
F5 01 40 01 FF
return
：
FC 40 00
send
：
F5 01 40 01 FF
return
：
FC 40 00
Leave network
send
：
F5 01 40 02 FF
return
：
FC 40 00
send
：
F5 01 40 02 FF
return
：
FC 40 00
Create new network
send
：
F5 01 40 03 FF
return
：
FC 40 00
send
：
F5 01 40 03 FF
return
：
FC 40 00
Open network: The main coordinator node takes effect, indicating that the open network allows terminals to join for a period of time,
and the command configures the "centralized network opening time" parameter. This command is invalid for terminals and dormant
terminals, and only the coordinator node (E180-Z8910SX/P) is valid.
Leave network: The coordinator executes this command to clear the original network and create a new network at the same time. The
terminal node executes this command to clear the saved network, and then executes the restart or create a new network command to
join the new network.
Create a new network: mainly for terminals, execute this command to join a new network, you need to leave the network first and then
execute a new network to join a new network.
6.6 HEX parameter description
6.6.1 System sending mode
Read instruction format:
command format command example
send
：
FE 01 26 FF
return
：
FB 26 send_mode
send
：
FE 01 26 FF
return
：
FB 26 02
Configuration instruction format:
command format command example
send
：
FD 01 26 mode FF
return
：
FA 26
send
：
FD 01 26 02 FF
return
：
FA 26
mode
：
0x00 broadcast (default);
0x01 Multicast (you need to configure the target group number in configuration mode first)
0x02 Transparent transmission on- short address (you need to configure the target short address in
configuration mode first);
0x03 Transparent transmission on- long address (you need to configure the target long address in
configuration mode first);
0x04 Protocol on short address (the first two bytes in the transmission mode are the short network
address of the target device);