Chengdu Ebyte Electronic Technology Co., Ltd.
E180-Z5812SP Product Manual
Copyright ©2012–2019,
Chengdu Ebyte Electronic Technology Co., Ltd.
14
network address
0xFFFF
can be switched at any time through configuration
commands;
Local MAC
address
Read
64bitMAC
The MAC address assigned by the network of this
module cannot be changed by the user (re-entry network
change)
Destination
MAC address
Read/Write
64bitMAC
In fixed-point mode, use long address to send
Equipment type
Read/Write
E
、
S
They are: non-dormant terminal, dormant terminal;
Channel
Read/Write
CH11
~
26
The physical channel of ZIGBEE work;
Sending mode
Read/Write
0
、
1
、
2
、
3
、
4
、
5
Configure the transmission mode of the module, which
are: broadcast mode, multicast mode, short address
on-demand mode, long address on-demand mode,
protocol on-demand, protocol multicast, please refer to
the corresponding mode function introduction for
details;
Output mode
Read/Write
0
、
1
、
2
、
3
、
4
、
5
Configure the data output mode of the module,
respectively:
Penetrate;
Data + short address;
data + long address;
data+RSSI;
Data + short a RSSI;
Data + long a RSSI
;
Transmit power
Read/Write
0dbm
~
12dbm
The output power of the module has high requirements
on power consumption, and the transmission power can
be reduced to save average power consumption in
occasions where there is no requirement for distance;
Remote Config
ID
Read/Write
2 Bytes
It is used to judge whether the data received wirelessly
in the air is a remote configuration command.
Customers can change the unlimited configuration ID
according to their needs. The default is A8 8A;
Local network
group number
Read/Write
1
~
254
Used to configure the group number of the device in the
network;
Target network
group number
Read/Write
1
~
254
It is used to configure the group number of the
corresponding target when the device is multicasting;
Wakeup period
(sleep time)
Read/Write
0
~
2010 S
It is used to configure the wake-up cycle of the terminal
sleep device. The larger the cycle, the lower the overall
power consumption, but the greater the delay in
receiving data;
Lost parent
node
reconnection
period
Read/Write
1
~
254
minutes
When the parent node is lost (the coordinator is powered
off), the terminal device reconnects to the previous
network at regular intervals;