Chengdu Ebyte Electronic Technology Co., Ltd.
E03-W05A User Manual
Copyright ©2012–2020
，
Chengdu Ebyte Electronic Technology Co., Ltd
27
Client and UDP can create network links in any mode of the module.
7.3.2 Note for transparent transmission
The transparent transmission mode can only be used when the module is working in TCP Client and UDP. TCP
Server cannot enter the transparent transmission mode. After entering the power-on transparent transmission, you
must remember to manually activate the transparent transmission with AT+CIPSEND. If the user wants to start the
system For transparent transmission, you need to make relevant settings in the following interface.
7.3.2 AP The maximum number of connections connected to the server
When establishing TCP Server and TCP Client, pay attention to the option of opening and closing multiple
connections;
When the module is used as an AP, it can be connected by at most 5 STAs. When the module is working in TCP
Server mode, it can be connected by at most 5 TCP Clients. Therefore, it is recommended for customers to use
short packet data or not considering packet loss. UDP carries out relevant communication.
