Chengdu Ebyte Electronic Technology Co., Ltd.
E103-W03 _User Manual _EN_V1.1
Copyright ©2012–2022, Chengdu Ebyte Electronic Technology Co., Ltd
.
33
6.3.2 UDP remote configuration
During remote configuration, it is necessary to ensure that the module and the PC are in the same LAN. For the
configuration method, see the communication with the PC (either make the module in AP mode and connect the PC to
the module, or make the module in STA mode and connect the PC to the same router) to obtain the IP After the address,
directly enter the IP address and UDP port number 8009 (this port number is a fixed value and cannot be changed).
Remote configuration is essentially an AT command operation, see AT commands for specific commands. The following
figures are the remote configuration based on AP mode and STA mode respectively.
6.3.3 Web page configuration
When configuring the webpage, it is also necessary to ensure that the module and the PC are in the same LAN, find the
corresponding IP address of the module, and enter this IP address on the browser. The 192.168.1.104 here is just the IP
address used for demonstration. Please refer to the specific IP address. Use the command: AT+SVRPORTIP? to query
and enter the correct IP to enter the configuration interface. The IP address is set according to the feedback result of the
module, and other parameters are set according to their own needs.
