Chengdu Ebyte Electronic Technology Co.,Ltd.
E103-W02DTU User Manual
Copyright ©2012–2021
，
Chengdu Ebyte Electronic Technology Co.,Ltd.
17
④
Please reset or power down and reboot after setting parameters to take effect; if there are other
parameters not set, please reset or power down and reboot after setting other parameters. Because
we only configure the socket protocol here, so we reset or power down and restart directly, and
then the WiFi connection status indicator on the base board will be lit immediately, indicating that
the UDP protocol is enabled.
⑤
Open the TCP & UDP test tool, create a connection, and set the parameters (see the figure
below).
