Ebyte 400SL37, Руководство пользователя

Страница: 19 / 25

Chengdu Ebyte Electronic Technology Co., Ltd.
E90-DTU SL User Manual
Copyright©2012–2021
ChengduEbyteElectronicTechnologyCo,;Ltd
19
“Node 2” NETID is 33.
Primary repeater 1‘s ’ADDH\ADDL are 08
，
33.
So the signal sent by node 1 (08) can be forwarded to node 2 (33)
At the same time, node 1 and node 2 have the same address, so the data transmitted by node 1 can be received by node 2.
②
Secondary repeater
Secondary repeater’s ADDH\ADDL are 33 ， 05.
Therefore, Repeater 2 can forward the data of Repeater 1 to the network NETID: 05.
Thus node 3 and node 4 can receive node 1 data. Node 4 outputs data normally, and node 3 has a different address than
node 1, so no data is output.
3
Two-way repeater
As shown in the figure: the data sent by node 1, the nodes 2, 4 can receive the data sent by node 2, 4, and node 1 can also
receive it.
10. Configuration instructions on computer

The following figure shows the E90-DTU SL configuration interface on computer, users can switch to the command
mode through M0M1, and quickly configure and read the parameters on computer.