EBS EBS 2600, Руководство пользователя

Страница: 65 / 184

65 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
4.2.2. SHUTTING DOWN IN EMERGENCY SHUTDOWN MODE
The printer can be shut down in emergency shutdown mode only if a printer failure occurs,
when shutting down in regular mode, which lasts longer, could cause further damage,
e.g. ink spill -
ing.
The printer can be shut down in emergency shutdown mode in two ways.
Press button
1k on the side wall of the printer's control unit 1 and hold it over 4 seconds
or
Detach power cord 7 (see Fig. 2 on page 16 ) from mains electricity or from control unit 1 .
Guard 1m , which protects connection sockets on the back panel of control unit 1 , has a magnetic
holder. Before power cord 7 is detached from control unit 1 , guard 1m should be removed. If you do
not have time to do this, the guard will fall out of its holders while power cord 7 is detached from
control unit 1 on an emergency basis.
4.2.3. RESTARTING THE PRINTER
The printer can be restarted ( i.e. shut down and started up again) regardless of the state it is in, e.g.
during printing. In such a case, printing pauses.
To restart the printer:
1. Press
.
The goodbye screen is displayed on the LCD.
2. Wait a few seconds.
The LCD display is blank.
The welcome screen is displayed on the LCD.
3. Wait several dozen seconds.
The main screen is displayed on the LCD.
The printer is restarted and ready to print the open project.
The user that is marked with in the user manager is logged in by default.