EBS EBS 2600, Руководство пользователя

Страница: 157 / 184

157 of 184
EN
EBS‑2600 User Man
ual
G2023/04/26_1EN 2023.05.16
the main screen to pause printing.
2. Use the cross head screwdriver to loosen two screws 5d (see Fig. 64 on page 156 ) that fas-
ten slide 5 .
3. Remove slide 5 .
4. Use the sprayer to spray wash‑up over the nozzle plate.
5. In place of removed slide
5 install standard sealing cover 5a or optional sealing cover 5b .
6. Use the cross head screwdriver to tighten two screws 5d to fasten the sealing cover.
8.3.2. TRANSPORTING THE PRINTER
Printer transportation involves the necessity to move the printer to another place:
– Within premises, e.g . between various production lines (internal transportation),
– To the outside, e.g . to a service point (external transportation).
Total weight of the printer with a 0.5 l bottle of ink: about 7.3 kg ( about 16.1 lbs ).
Weight of individual parts:
– Control unit with a printhead and a 0.5 l bottle: about 4.8 kg (10.6 lbs)
– Installation kit (beams, holders): about 2.5kg (5.51 lbs)
– Bottle of ink with a capacity of:
0.25 l:
about 0.25 kg (0.55 lbs) ; starter bottle
0.5 l: about 0.5 kg (1.10 lbs)
Internal transportation
The printer can be handled by instructed persons .
To transport the printer within the premises:
1. Shut the printer down in regular mode.
For more details see “4.2.1. Shutting down in Regular Mode” .
2. Set ink‑system valve 1d at the TRANSPORT position.
1d
3. Transport the printer to a required destination.
NOTE: Handle the printer in a horizontal position!
The printer must be transported in a horizontal position.
Make sure that the nozzle plate, control unit screen, cables are not damaged during transport.
It is recommended that the nozzle plate be protected with standard sealing cover 5a or op -
tional sealing cover 5b installed in place of the slide. For more details see “8.3.1.1. Installing
a Sealing Cover” .
4. Position the printer at a required workstation.