CPX200NB ALARM CONTROL UNIT – USER MANUAL
18 / 30
EN
To add a new user:
1.
Enter the function code
and press
to confirm.
2.
Enter the admin code and confirm it with
. 3 beeps will confirm the
correct code input.
3.
Numbers of already existing users will be displayed.
4.
Enter the ID of newly added user (1 to 8), other than already added ID
numbers, and press
to confirm. Numbers of partitions a new user can
have access to will be displayed.
5.
To activate/deactivate LED of an appropriate partition, press 1 or 2. When the
access is set, press
to confirm. All LEDs shall be off now.
6.
Enter the code of a newly added user (4 to 7 digits) and press
to
confirm.
7.
Enter the code of a newly added user again and press
to finish adding
or
to exit without saving changes.
8.
Successful adding a new user will be confirmed with 3 beeps, otherwise a
constant sound will be emitted.
7.5.
USER DELETE
You can delete a user here. Codes can be deleted by the administrator only. 3 beeps
will confirm the successfully entered function. Default admin code: 1111.
Note: You cannot delete Admin account (user no. 0) and
Installer account (user no. 9)
To delete a user:
1.
Enter the function code
and press
to confirm.
2.
Enter the admin code and confirm it with
. 3 beeps will confirm the
correct code input.
3.
Numbers of already existing users will be displayed.
4.
Enter the ID code (1- 8) of a user to be deleted and press
to confirm or
to exit without saving changes.
5.
Successful deletion of a user will be confirmed with 3 beeps, otherwise a
constant sound will be emitted.
7.6.
CHANGE OF USER CODE
The user can change its code here. 3 beeps will confirm the successfully entered
function.
