EBS Active Track, Руководство по эксплуатации и техническому обслуживанию

Страница: 74 / 79

74 Active Track (beta version)
© 2013 EBS
13 Cooperation with monitoring system
Proper using of all functions of Active Track require monitoring system, which will be
able to sent, receive and interpret all messages from Active Track. Main device in that
system is receiver (communication server) and Analyzer software. Analyzer software
interprets data from Active Track device, store them and visualize them in proper and
readable way.
Active Track will sent to the server following information:
GPS
Information about actual device position
EMERGENCY
Pushing of Emergency button will cause sending suitable message to the
receiver.
Note:
Information about pushing Emergency button cannot be send more frequently
than once for minute. When button is pushed more frequently, message about
second push will not be send (LED will light-up signalizing pushing of button).
CALL ME
Pushing "Call me"" button will sent proper message.
Note:
Information about pushing “Call me” button cannot be send more frequently than
once for minute. When button is pushed more frequently, message about second
push will not be send (LED will light-up signalizing pushing of button).
RFID
Note:
Applies only device version with built in RFID transponders reader.
After RFID read-out , Active Track device will send unique ID of RFID tag. In
case of repeated read-out mode data will by sent after last RFID read-out (or
after defined time)
SABOTAGE
In case of sabotage (attempt to open the casing) device will send proper
message.
SHOCK
Any instance of the device striking too strongly against a hard surface is
detected and sent to the monitoring station.