EBS Ink-Jet Systems EBS-6200, Руководство пользователя, Страница: 99 / 124

EBS-6200
Printer User's Manual
Chapter 5 - Examples of How to Operate the Printer
#1.0
97
20091020
order to record the text file in the library and save it in
the memory. Otherwise, press the
« V keys
again and go on improving your drawing.
ts; the overprint should look like as
•
If the drawing is acceptable, press the V key in
2) Define print parameters following the instructions given in section
5.1 How to Print the First
Sample Text File
point
7)
.
3) Print the text file called LOGO following the instructions given in section
5.1 How to Print the
First Sample Text File
point
8)
.
5.2.5. How to Print a Bar Code
Assumption: an EAN-13 bar code should be printed on produc
follows:
Define a B
AR CODE
type subfile and 1) specify a numerical value to form the bar code.
´
In the main MENU select the TEXT SERVICE item and then the CREATE NEW TEXT item.
´
You are prompted to type in a text-file name. Input a name, e.g. BARC, and confirm.
Ty Barcode pe :
Co : EAN-13 de
Conte nts : 5007463006216
Height : 25
Elongat.X : 1
Spec.reg. : None
Front dis : 0
Back dist
: 0
Signature : YES
Inversion NO :
2) Define print parameters following the instructions given in section
5.1 How to Print the First
Sample Text File
point
7)
.
•
Set subfile parameters (the § key), input the
nfirm.
parameters.
.1 How to Print the
First Sample Text File
point
8)
.
rint a Complex Subfile
5
th
August 2009 10:34 hours; the text should look like as follows, when printed:
numerical value of the bar code (only 12 characters, the
13
th
character is calculated automatically) and co
If the bar code is acceptable, press the V key in
order to record the text file in the library and save it in
the memory. Otherwise, press the
§
key again and
go on with modifying the bar code and subfile
3) Print the text file called BARC following the instructions given in section
5
5.2.6. How to P
Assumption: it is 2
1) A com
a)
cr
plex file of this type can be created in three ways (!):
parately and save them with their own
by their names,
,
e defined and the other are
the main MENU select the TEXT SERVICE item and then the CREATE NEW TEXT item.
eate each of the subfiles of your complex file se
names, then start a new file and link all subfiles into it
b)
create a text file and define all subfiles within it
c)
use a mixed method to create a text file in which some subfiles ar
linked by their names.
The mixed method is used in the example. The text files called DATI and LOGO have already
been defined in the sections above and are used in this example (the text files need to be created
in advance to illustrate the methodology properly).
Define two T
EXT
- ASCII characters type subfiles, link the graphical image called LOGO by its
name, create three other T
EXT
- ASCII characters type subfiles and link the text file called DATI
where special registers are used.
´
In