EBRO ARMATUREN SBU Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 50

EBRO ARMATUREN SBU Скачать руководство пользователя страница 26

Operating instructions - SBU IO-Link

Page 26 of 50

E)

Mounting instructions

When mounting the SBU IO-Link , the safety information in these operating instructions and the safety
regulations applicable at the operating company's place of installation must be observed. The mounting or
installation location must have a sufficient load-bearing capacity and should be free from vibrations.
The SBU IO-Link  should be mounted only in an area that meets the requirements for the temperatures and
environmental conditions. The general directives for workplaces are to be complied with. Also observe the
installation conditions specified in these operating instructions.
The SBU IO-Link  is assembled and adjusted in the factory for the purpose of use that you ordered. This
purpose of use thus also corresponds to the intended purpose of use of the SBU IO-Link .
Before installing the SBU IO-Link , the intended purpose of use must be compared once again with the
installation situation. The installation must be approved by the operating company and may only be carried
out by qualified personnel.
The actuation of the SBU IO-Link  is only permitted when it is fully mounted on a pneumatic quarter turn
actuator.

Proceed with the utmost caution when installing the SBU IO-Link and avoid damage to its components.

Danger due to damaged components.

Very serious injuries due to moving components.

Very serious injuries or death due to electrocution.

DANGER

Danger of the upper limbs being crushed.

Very serious injuries when actuating the SBU IO-Link if it is not fully mounted
on a depressurised pneumatic quarter turn actuator.

Before switching on the SBU IO-Link , all components and connections must be
fully mounted by qualified personnel.

The quarter turn actuator should be depressurised and secured against
uncontrolled actuation.

DANGER

«
...
24
25
26
27
28
...
»

Содержание SBU



















































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды