18-5-2011 7 033000=15301
A
BRAND CODE
BRAND CODE
Philips /
Radiola
1
Telefunken / Saba
/ Normende
4
Akai /
Daewoo / JVC
/ Panasonic /
Sharp / Sony /
Toshiba
2
Grundig /
Blaupunkt
5
Brandt /
Thomson
3
Nokia / ITT
6
1. Turn on the device you want to control.
2. Press and hold
S
(8) until the LED indicator (2) lights steadily. Release
S
button.
3. Press the mode button (4) that matches the equipment you wish to
control. The LED (2) blinks once.
4. Enter the code corresponding to your brand, point the TAKE 6 Remote in
the direction of your equipment, press
CHAN+
(6) once only. Continue to
point the TAKE 6 Remote at your equipment until the equipment changes
Channel (the remote control sends an IR signal every second. Please wait
until your equipment reacts). When your equipment does react, press on the
key -/-- (13) to confirm. If you accidentally miss the code, you can stop the
autosearch by pressing
CHAN-
(6) and by repeatedly pressing this key return
to the right code. Press -/-- (13) to confirm.
Remark:
if some functions of your equipment don’t work, you need to try
another code for your brand. The search function starts after the last
confirmed code. For example, if it was 030, the search function starts at 031,
and it will keep on trying until the last possible code.
4.3 Automatic code search for all brands
When searching an unknown code, you can step through the library
automatically (AutoSearch). When your equipment responds, you can stop
the searching process and store the code you found.
Note: as you can dedicate any appliance (TV, DVD, STB...) to DVR, DVD, CD,
STB, AUDIO or AUX key, you need first to enter any 4-digit code for the kind of
appliance you wish to control (found in the code book), i.e.: If you want to
program a STB under the DVR key, enter ANY STB code found in the code
book and then follow the steps below:
1. Turn on the device you want to control.
2. Press and hold
S
(8) until the LED indicator (2) lights steadily. Release
S
button.
3. Press the mode button (4) that matches the equipment you wish to
control. The LED (2) blinks once.
4. Press
CHAN+
(6) once. After a few seconds the remote starts stepping
through the code library (fast search, 1 code per second). When the device
responds, you can press
CHAN+
(6) to switch to slow search (1 code per 3
seconds). You can step back by pressing
CHAN-
(6) (you can step forward
by pressing
CHAN+
(6) in case you went too far back). As soon as the device
responds again, press the -/-- key (13) to store the code you found.
4.4. Manual code search
Note: as you can dedicate any appliance TV, DVR, DVD, STB, AUDIO, AUX,
keys, you first need to enter any 4-digit code for the kind of appliance you
wish to control (found in the code book), i.e.: If you want to program a STB
under the AUX key, enter ANY STB code found in the code book and then
follow the steps below:
1. Make sure your equipment is switched on.
2. Press and hold
S
(8) until the LED indicator lights steadily. Release
S
3. Press the mode key (4) that matches the equipment you want to control
(for example TV).
4. Press
CHAN+
(6) repeatedly until the channel changes. If you step past the
correct code use
CHAN-
(6) to go back to the right code.
5. When the equipment you want to control reacts, press -/-- (13) to confirm
the code.
Содержание TAKE 6 IR+RF
Страница 2: ...18 5 2011 2 TAKE 6 IR RF UNIVERSAL REMOTE 6 in1 Button layout 033000 15301A...
Страница 42: ...18 5 2011 42 033000 15301A...
Страница 83: ...18 5 2011 83 033000 15301A NOTES...
Страница 88: ...18 5 2011 033000 15301A www ebodeelectronics eu...
