60
If you select this checkbox, when the motion has been detected, the camera will record automatically and store
the record files.
Make sure you have set the Alarm record files storage path, please go to
Record—> Storage location
page
to verify this settings.The default alarm record time is 30s and pre-alarm record time is 5s, please go to
Record—> Alarm Record
page and change the alarm time settings.
E IO Output
If IO alarm is triggered and IO alarm output device will always alarm (sound alarm is issued a warning sound,
alarm lights in flash etc.). Click "Clear IO alarm output" , the alarm output device will stop alarming. If IO alarm
is triggered again after alarm interval, IO alarm output device will be restart.
Step 05: Set detect area
Click set detect area and it pop up a window, then you can draw the detection area. Click
OK
button after
settings. When something moving in the detection area, the camera will alarm.
Figure 4.51
Step 06: Alarm Schedule
①
Alarm anytime when motion is detected
Click the black button up the MON, you will see all time range turn red. When something moving in the
detection area at anytime, the camera will alarm.
