59
To enable motion detection, follow the steps below:
Step 01: Enable Motion detection
Step 02: Sensitivity
---- It supports three modes: Low, Middle and High. The higher the sensitivity, the camera
will be more easily alarmed. Select one motion sensitivity.
Step 03: Trigger interval
--- The interval time between two motion detections. Here supports
5s/6s/7s/8s/9s/10s/11s/12s/13s/14s/15s. Select one interval time.
Step 04: Select the alarm indicator
When the motion has been detected, the alarm status will turn to Detect alarm.
Figure 4.50
There are four alarm indicators:
A Camera Sound
and
PC Sound
if you select Camera Sound or PC Sound, when the motion has been detected, the people around the camera
will hear beep alarm sound.
B Send E-mail
If you want to receive alarm emails when motion is detected, you must select Send E-mail and set Mail
Settings first.
C Take Snapshot
If you select this checkbox, when the motion has been detected, the camera will snap the live view window as
a still picture and load it to the FTP or SD card.
Make sure you have set the storage path in
Video->Snapshot
settings panel.
Time interval:
The interval time between two pictures.
D Recording
