Ebode IPV68P2P, Быстрый старт

Страница: 10 / 104

12-11-2015 - 10 - ebode IPV68P2P
5.
After logging in for the first time, the “Setup Wizard” will pop-up automatically. Please
set the basic parameters, such as camera name, camera time, wireless settings and so on.
6.
After logging in, you should see live video on the web interface. If not, please go to the
FAQ section on the ebode electronics website ( www.ebodeelectronics.eu ).
Notes:

If you forget your username or password, press and hold the reset button on the
bottom of the camera using a pin for 5 seconds. This resets the camera to factory default.

If you want to access the camera over wireless or Internet, continue with the setup by
following the Wireless and Remote Access steps below.
Input the New
username and
password and
confirm the
password.