31-7-2014 40 ebode IPV58P2P
Step 2 DO DDNS Service Settings within the Camera
Please set DDNS Settings within the camera by hostname, a user name and password
you’ve got from www.no-ip.com
Take hostname ycxgwp.no-ip.info, user name
test, password test2012 for example.
Firstly, goes to option of DDNS Settings on the administrator panel.
Secondly, select No-Ip as a server.
Thirdly, fill test as DDNS user, fill password test2012 as DDNS password, fill ycxgwp.no-
ip.info as DDNS domain and server URL, Then click save to make effect. The camera will
restart and to take the DDNS settings effective.
Fourthly, after the restart, login the camera, and go to option of Device Status on the
administrator panel, and check if the DDNS status is successful.
If failed, please double check if you have input the correct hostname, user name, and
password, and try to redo the settings.
NOTE:
If you have set Third Party DDNS successfully ,the IPCAM Domain Name will be
invalid. The Third Party DDNS and the IPCAM Domain Name cannot work at the same
time, the last time you configured will take effect.
②
Do port forwarding within the router
Example: The camera’s LAN IP address is http://192.168.8.100:2000. Firstly, login the
router, goes to the menu of Port Forwarding or Port Trigger (or named Virtue Server on
some brands of router). Take Linksys brand router as an example, Login the router, and
goes to Applications & Gaming->Single Port Forwarding. Secondly, Create a new column
by LAN IP address & HTTP Port No. of the camera within the router showed as below.
Figure 6.30
Assign a
name as you
like here
Fill the Media Port no. of the
camera on the column of
External Port and Internal Port
