User Manual VW 1350 HB
– The Manual Operated VMS-Trailer
4 MACHINE COMMISSIONING
PROCEDURE
This chapter explains how to use the machine in a proper way.
4.1 OPERATION CHARACTERISTICS AND
LIMITATIONS OF THE MACHINE
4.1.1 CAPACITIES
•
It is not allowed to use the machine with a wind power
above 8 Bft.
•
Don’t exceed the 90 km per hour while driving.
•
Always place the upper-frame in the transport mode while
driving as shown in Figure 7 and 8.
•
Do not drive with the machine when the upper-frame is not
in its transport position.
•
When the batteries are fully loaded (100%)
, it’s possible to
use the machine for 5 days non-stop. In the spring and
summer it is possible to use the machine for a longer
period. It depends on the weather conditions and the
animation which is selected.
4.1.2 STORAGE COMPARTIMENTS
There is a storage space in the machine for the following components:
•
4x Stamp plates (400*400*40 mm)
•
3x Andreas stripes (2000*225*30 mm)
•
1x Spare wheel (195/50 R13)
4.2 PHYSICAL MACHINE CONTROLS
In order to get the machine in its operating position, the following steps
need to be taken:
1. Disconnect the machine from the towing vehicle and use the nose
wheel of the machine. Please use the handbrake of the machine.
2. Please use the extendible stamps.
Figure 7
