Nova Flair GmbH & Co. KG, Operating Instructions with EU Declaration of Conformity Dust Extraction Unit Taifun II Premium GreenTech
6
A 2.6 Notes on special hazards
A 2.6.1 Electrical energy
Only use original fuses with prescribed
amperage! Make sure that the mains
voltage corresponds to the required
voltage of 230V. In case of malfunc-
tions in the electrical power supply, switch off
the machine immediately.
Work on electrical systems or equipment may
only be carried out by a qualified electrician or
by instructed persons under the direction and
supervision of a qualified electrician in accor
-
dance with the electrotechnical regulations.
If inspection, maintenance, cleaning and repair
work is carried out on parts of the machine, the
nail dust collector must be disconnected from
the circuit or de-energised by removing the po-
wer plug from the socket.
The electrical equipment of the machine must
be inspected/checked regularly.
Defects, such as loose connections or scorched
cables, must be rectified immediately.
A 2.6.2 Block diagram/schematic representation of the system
A 2.6.3 Noise
The machine produces only slight, barely perceptible vibrations and noise with a rating level of LAR >
58 dB(A). According to the „Noise and Vibration Occupational Health and Safety Ordinance“, in short
LärmVibrationsArbSchV - these are not health hazards.
Illuminated LED
push button ON/
OFF
Cold appliance
plug / connection
with fuse link
Potentiometer
for infinitely
variable Speed
control
Picture no. 5
Front/side view of the nail
dust collector with operating
devices and mains connec-
tion
Fuse
2A inert
Fan motors
Filter and filter guide
Control and electronics
Fuse and mains connection
Kaitstud / Secured by https://mereneid.eu/
