Operating instructions
M3G150-IF21-52
Translation of the original operating instructions
3. TECHNICAL DATA
3.1 Product drawing
All dimensions in mm.
1
Direction of rotation counterclockwise, viewed toward shaft
2
Through-hole for M10 screw
3
Max. clearance for screw 12 mm
4
Max. clearance for screw 16 mm
5
Cable diameter min. 4 mm, max. 10 mm, tightening torque 4 ± 0.6 Nm
6
Tightening torque 3.5 ± 0.5 Nm
7
Groove depth 4 mm
8
Key DIN 6885 - A - 8 x 7 x 50
Maximum permissible forces for using the motor with belt pulley on the motor shaft
Fa
Max. permissible axial load: 300 N
Fr
Max. permissible radial load: 2480 N
For maximum permissible forces for using the motor with fan impeller on the motor shaft, see next page
Item no. 50781-5-9970 · ENU · Change 209539 · Approved 2021-07-15 · Page 4 / 16
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · [email protected] · www.ebmpapst.com
