Ebinger OSK 400, Инструкция пользователя, Страница: 8 / 20

8
DE EN FR ES IT
Mounting and securing the cover
Remove the screw that secures the spring side arm to
the hose reel bracket (fig. 7).
Place the cover over the arm and secure it with the two
screws provided M6×45.
Adjusting belt tension
After securing the cover or after heavy use, it may be
necessary to tighten the belt. Turn the tension pivot
with a wrench 17 mm and an allen key 4 mm, as shown
(fig. 8).
The belt may loosen over time with the use of the automatic hose guide. Periodically check the tension and
adjust it when necessary (see
"Adjusting belt tension" ).
Worn parts must be replaced with original replacement parts.
fig. 7
7
1
2
0,4 Nm
1 Nm
8
7
1
2
3
3
6 Nm
0,4 Nm
1 Nm
fig. 8
6. Hose guide maintenance
7. Information on the regular inspection of the components
No Details Check Frequency
1
Self-lubricating axle Condition Once a year
2
Sliding hose guide
axle
Condition Once a year
3
Sliding guide Condition Once a year
4 Timing belt Condition Once a year
5
Timing belt pulley Condition Once a year
6 Spring side axle Condition Once a year
7
Pulley pivot
Proper
tightening
Once a year
4
5
6
7
5
3
2
1
1