Press and hold the button to activate
walking assist mode. The walking icon
will be displayed on the screen and the
motor will move the bicycle at about 4mph.
You need to keep holding down the
button until you are done wanting to use
the walk assist.
To turn off the walk assist, let go of the
button.
The function is designed for walking
alongside the bicycle only. Please do not
use this function when riding.
FUNCTION OVERVIEW
1
ON/OFF:
Install the display and control pad on the handlebar and adjust to your desired location, then
secure tightly. Plug in the display with the unit in off mode.
FUNCTION OVERVIEW
To turn the unit on, press and hold the
power button to start the display. Press
and hold the power button again to
switch it off.
Note:
The battery must also be turned on (if
applicable)
2
Pedal Assist Level:
The display unit is integrated with the
control pad to provide several levels of
power. Press the or button to increase
or decrease the power and speed levels.
When the display is powered ON the
default is PAS level 0.
Note: Increasing your PAS level provides
more power and speed.
3
Walk Assist Mode:
4
Backlight Display:
Press and hold the button to turn on the
C961’s backlight screen. If a front light is
installed, this will also power the light. To
turn it off, press and hold the button
again.
5
TRIP Reset:
With the power on, press and hold both
power and buttons at the same time
to reset the TRIP distance.
Note:
This does not reset the Odometer, so
the overall mileage data of your motor will
still be intact.
5
C961
MANUAL
© Copyright Ebike Essentials. All Rights Reserved.
www.Bafangusadirect.com
