background image

34

35

Troubleshooting

GB

5.  Cleaning 

Cleaning of air outlet 

Wipe off the stains by cleaning cloth, water is not allowed to wash this 

machine.

6.  Particulate sensor (approximately once every two months)

Wipe the lens with a dry cotton swab periodically to remove 

any dirt. (Moisture or tobacco smoke residue may cause it to no 

longer work properly). First remove the particulate sensor cover, 

use a dry cotton swab to wipe the lens.

Cleaning of air outlet 

Switch off the power and pull out the plug from socket. Put the hand on air grid side with Δ symbol and 

pull up to remove. Take out the air grid during running, the machine will stop automatically, put back  

the air outlet grid and continue performing the function before power off.

Do’s and don’ts

GB

Safety notes 

When the indoor humidity is too high, condensed water will be generated on air quality sensor, at this 

time and under automatic mode, though the air quality is very good, the status lamp on the panel will 

indicate the air quality is bad and will suggest you to select the wind volume manually. 

Don’t touch the power 

plug with wet hand.

Ensure the power is switched off 

before cleaning the purifier.

Don’t use power in any other form; 

AC 220V 50Hz is the only type 

of power can be utilized for this 

product. Don’t open the frame and 

repair this product by yourself, the 

repair should be done by professio-

nal repair people. Don’t pour water, 

liquid or flammable detergent 

into the product to avoid product 

damage or fire caused by electric 

shock.

When the purifier is working, ple-

ase keep the back with 20cm space 

and above 30cm space on both 

sides. Please place this product on 

a dry and stable plane for use and 

get away from the heat resource 

and over humid position.

Don’t wash the mainframe by 

solvent and chemical liquid to 

avoid corrosion on frame. Don’t 

put hand or any objects in wind 

outlet. Don’t pull the power cable 

to switch off; the power should be 

switched off safely by catching the 

plug and remove.

When it’s not used for a long time, 

please remove the plug. Supervise 

the children not to touch and use 

this purifier. The air flow should be 

kept clear, don’t let dust, cotton 

fiber, hair or other material block 

the wind inlet.

Содержание VISIV




















Отзывы: