30
31
Maintenance
GB
1. Primary effect filter screen: The cleaning frequency is decided by the wind speed, air pollution degree
and accumulative time, normally it’s cleaned every 2~3months. Please clean timely, otherwise the
purification efficiency will be affected.
2. HEPA composite filter screen: It’s consisted by HEPA, absorption& purifying material, functionality
filtering material, can effectively purify the suspended particles, viruses, bacteria in the air and remove
odors and harmful gases.
3. The cleaning of primary effect filter screen
1) Turn off the power, and remove the plug from the socket.
2) Put the hand on handle and pull outward in a certain angle, and lift up the rear cover for a certain
distance, then it can be taken off from the purifier.
3) Pull out the primary effect filter screen lightly by catching the two slides, and then pull up it, be
careful not to make dust fly.
Handle position
Pull out
Maintenance
GB
4) The dust and flocs can be removed by vacuum cleaner or brush, also it can be washed by water or
detergent if it’s too dirty, install it back on purifier after dry. (Don’t bend during cleaning process to
avoid damage).
5) Installation method, insert the inserted piece which is under filter screen into the corresponding card
slot (Please note the filter screen’s direction, two slides should be outward), then buckle up the upper
button stand.
6) Install the filter components back on the product, firstly put the HEPA composite filter screen,
primary effect filter screen, front cover on corresponding position and insert the inserted pieces into
corresponding card slots, then combine the front cover and machine card slot by suction.
suction
wash
The two inserted piece into the card slot of the
machine frame.
