Eberg EDO, Инструкция по эксплуатации

Страница: 15 / 18

EDO EN
15
www.eberg.eu
VII. TECHNICAL SPECIFICATIONS
VIII. TROUBLESHOOTING
IX. DISPOSAL OF THE DEVICE
Model EDO
Voltage, frequency 220V, 50Hz
Power 23W
Tank capacity 4l
Humidofication efficency 250 - 300ml/h
Device dimensions 188 x 188 x 280mm
Nett weight 1,25kg
Description of the problem Possible cause Suggested action
The humidifier does not turn on,
the display screen is off.
The device is disconnected from
the power source.
Plug the power cord into the outlet and
turn on the device.
The display screen is on, air is
pumped, but no steam is coming
out of the nozzle.
The water tank is probably
empty.
Pour water into the tank and wait at least
10 minutes before turning the machine
back on.
Unpleasant smell when the
humidifier is operating.
First start of the humidifier.
Pour out the water, rinse the tank, add
clean water.
There is dirty water in the tank.
Pour out the water, clean and dry the
tank, and let it air out for a minimum of 12
hours. Then pour in clean water.
Very little steam comes out of the
nozzle.
The ceramic membrane is dirty
or there is dirty water in the
tank.
Clean the ceramic membrane and replace
the water with clean water.
Water temperature too low.
Set the steam level to 3 (max). After 15
minutes, the device will start working
properly.
INFORMATION REGARDING CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH THE
EUROPEAN DIRECTIVE 2012/19 / EU
After the end of product life the device must not be disposed of with household waste. We pay
particular attention to the key role of the consumer in the recycling of this type of waste. The
device must be disposed of at a waste disposal center. Sorting waste such as old electrical and
electronic equipment prevents negative consequences for the environment and human health
which could result from inappropriate disposal of such waste. Sorting such waste allows the
materials from which these devices are made to be recovered, resulting in significant energy
and resource savings. Such disposal requirements are marked with the label of the crossed
waste container placed on the device.