EBENCH KH 2330, Руководство по эксплуатации и технике безопасности

Страница: 6 / 10

DEVICE/ SOURCE SELECT
[ » CD / TUNER / TAPE / AUX « ]
• Press the appropriate button
*
to select a device or change the source:
CD = CD player TUNER = radio TAPE = cassette recorder AUX = external device, e.g. record deck
ADJUST VOLUME
[ » VOLUME / MUTE « ]
• To increase the volume use the button
W
.
• To reduce the volume use the button
Q
.
• To mute (silence) the loudspeakers and headphones press the mute button
^
.
ADJUST TONE
[ » CLASSIC / ROCK / POP « ]
Use the tone selector button
%
to set the tone quality of a track to suit the type of music and increase listening pleasure. The
current setting CLASSIC, ROCK or POP is shown in the display
@
- (blank display = neutral tone).
HEADPHONES
[ » PHONES « ]
8-32 Ohm stereo headphones
5
can be connected to the headphones connector with a 3.5 mm jack plug. As soon as the headphones
are connected the loudspeakers are turned off. Please note that high levels of sound can lead to serious hearing damage.
SETTING THE CLOCK
0 1) Press the Display button
R
to change to the time operating indicator.
0 2) Press and hold down the MEMORY/CLK-ADJ button
\
. The 24 hour mode indicator (24 H) flashes.
0 3) Press the Up/Forward button
)
or the Down/Reverse button
8
to set the clock in 24 hour or 12 hour display.
0 4) Press the MEMORY/CLK-ADJ button
\
again - the hours indicator flashes.
0 5) Set the hours using the Up/Forward button
)
or the Down/Reverse button
8
.
0 6) Press the MEMORY/CLK-ADJ button
\
again - the minutes indicator flashes.
0 7) Set the minutes using the Up/Forward button
)
or Down/Reverse button
8
.
0 8) Press the MEMORY/CLK-ADJ button
\
again - the display stops flashing. The clock is now set and starts (the colon flashes).
SETTING THE SWITCH-ON TIME
[ » TIMER « ]
If the Switch-on time feature is enabled then your Designer Audio Unit can wake you at your chosen time.
0 1) Using the appropriate button
*
select the desired device/ source (CD, TAPE or TUNER).
0 2) Set up the source, i.e. for TUNER (RADIO) set the desired station, for TAPE (CASSETTE RECORDER) insert the tape and wind
to the correct place or insert a CD and if required program a track sequence.
0 3) Press and hold down the TIMER button
-
. The display
@
now shows TIMER.
NOTE: You have five seconds to complete the following steps. Otherwise the process is halted and you must begin
again with step 4.
0 4) Press the Display / operating indicator button
R
twice. The time appears in the Display
@
and TIMER flashes.
0 5) Press and hold down the MEMORY/CLK-ADJ button
\
. The hours indicator flashes.
0 6) Set the hours by pressing the Up/Forward button
)
or the Down/Reverse button
8
as appropriate.
0 7) Press and hold down the MEMORY/CLK-ADJ button
\
. The minutes indicator flashes.
0 8) Set the minutes by pressing the Up/Forward button
)
or the Down/Reverse button
8
as appropriate.
0 9) Press the MEMORY/CLK-ADJ button
\
again - the Switch on time is stored.
10) If you wish to be woken to a cassette: Press the Play button
3
.
11) Then switch off the Designer Audio Unit (ON-/OFF-button
E
).
ACTIVATE SLEEP FUNCTION
[ » SLEEP « ]
You can set a time of between 90 and 10 minutes, after which the device switches itself off.
• To activate a Switch-off time of 90 minutes, press the SLEEP button
-
once briefly.
• To set a shorter Switch-off time, keep the SLEEP button
-
pressed until the desired time is displayed.
• To switch off the Sleep function , press the SLEEP button
-
repeatedly until the display
@
no longer shows SLEEP.
6