8
1
2
3
4
Start menu
The start menu is used to quickly and simply set the three requisite basic
settings; it is only shown the first time the thermostat is switched on (or if
the thermostat is fully reset using the reset function). Begin by choosing a
language, continue with the date and time setting, and finish off by setting
operation mode and sensor. The headings in grey are the menu name used
in the thermostat.
Language setting
LANGUAGE
You can choose between several languages; the factory setting is
English. Set the required language by scrolling through them using the
or button and confirm with .
Date & time
DATE/TIME
The time and date must be set in order for the program functions to
work correctly. The thermostat automatically sets the day of the week
and summer and winter time (this function can later be switched off
later if so desired).
The value that is blinking can be decreased or increased using the
or button; when the required setting is made, confirm it with and
the next value will start to blink. Repeat this procedure until all the val-
ues are set. Start by setting the applicable date, month and year. Then
set hours and minutes.
Operation mode
OPERATION MODE
There a four operation modes:
HEATING
,
COOLING
,
INDUSTRY
or
MAX/MIN
.
The operation mode can only be selected in the start menu and can-
not be changed after this menu is left.
The settings for heating and cooling are for regulating the temperature
in home, office and storeroom environments or similar. The industry
mode is used for controlling industrial processes and high tempera-
tures or to safeguard sensitive installations against frost damage.
Max/Min is used above all to keep roof and ground surfaces free of
snow and ice.
Set the required operation mode by scrolling through them using the
or button and confirm with . When you have selected the
mode that best suits your needs, configure the sensors for your in-
stallation. Read more about sensor settings under the section for the
operation mode you have selected.
Exit the start menu
EXIT
When you have made all the settings, press
EXIT
to leave the start
menu; by pressing
YES
you come directly to
DISPLAY MODE
, which is the
"normal" mode for the thermostat.
INTRODUCTION
