EBECO 8581610, Руководство пользователя

Страница: 22 / 36

22
Summer and winter time
S/W TIME
The thermostat calendar and clock are automatically set to summer and
winter time but the function can, if it is not required, be switched off.
Summer and winter settings are in the
MAIN MENU
under
SYSTEM
; select
S/W
TIME
. Switch off the function under
ON/OFF
in the menu and select
OFF
, a
message is shown for a short time confirming that the function is switched
off. Activate the function in the opposite way by selecting
ON
.
Sensor settings
SENSOR
The sensor settings are in the
SYSTEM
menu under
SENSOR
, and there select
the sensor you want to use by browsing with or and confirm with .
The thermostat works as a Room thermostat and measures the temperature
using a room sensor. When the thermostat is used to regulate cooling, the
room sensor can be installed either as
A
or
B
. It is only possible to use one
sensor at a time, but if there are two sensors installed you can switch be-
tween
A
and
B
.
Adaptive function
ADAPTIVE
The thermostat has a function that calculates when heating should be start-
ed to provide the required temperature at the right time. The function is
activated on delivery, but can be switched off as required.
You will find the settings for adaptive function in the
MAIN MENU
under
SYSTEM
, and there you select
ADAPTIVE
. Switch off the function under
ON/OFF
in the menu and select
OFF
, a message is shown for a short time confirming
that the function is switched off. Activate the function in the opposite way
by selecting
ON
.
Ventilation mode
VENT
If the room temperature increases by more than 3 °C in a minute, for example,
when airing, ventilation mode is activated. The thermostat then deactivates
heating for 15 minutes, after which it returns to the same setting; ventilation
mode shows in the display when it is activated. The function is activated on
delivery, but can be switched off as required.
You will find the settings for adaptive function in the
MAIN MENU
under
SYSTEM
, and there you select
ADAPTIVE
. Switch off the function under
ON/OFF
in the menu and select
OFF
, a message is shown for a short time confirming
that the function is switched off. Activate the function in the opposite way
by selecting
ON
.
Reset
RESET
There are three choices under the reset menu:
CONN TIME
,
OP MODE
and
FAC
SET
. You will find the
RESET
menu under
SYSTEM
in the
MAIN MENU
.