5
• Do not block the inlet or outlet areas of the Bedside Controller
and keep at least one foot of clearance around all sides to
prevent overheating.
• Do not place Ebb Bedside Controller on the floor where it can be
bumped or where someone is likely to trip over the power cord.
• Not for use in an oxygen-rich or flammable anesthetic environment.
• To avoid electrical shock, always unplug the power cord from
the wall before cleaning the Bedside Controller. Do not drop or
place the Bedside Controller in any fluids or allow fluids to enter
vent openings.
• If you notice any of the following, disconnect power from the
Bedside Controller and contact Ebb HumanCare.
– Changes in the performance of Ebb
– Unusual or harsh sounds
– If the Bedside Controller has been dropped or mishandled
– If the enclosure of the Bedside Controller is broken.
• There are no user-serviceable components inside the product.
Do not attempt to open the Bedside Controller.
Portable RF communications equipment (including peripherals
such as antenna cables and external antennas) should be used no
closer than 30 cm (12 inches) to any part of Ebb, including cables
specified by the manufacturer. Otherwise, degradation of the
performance of this equipment could result.
WARNING
Warnings alert the user about situations that could result in injury or death if not avoided.
!
!
