- 36 -
EBA 721-06 LT
A
D
E
C
D
B
C
F
max
min
Safety test
The safety regulations are according to the
regulations of the country where the cutting
machine is operated. The manufacturer
recommends a safety check is made every 5
years by an authorised service team.
•
Maintenance and cleaning
•
Grease the remaining parts twice a year (see
picture).
The main switch must be on "0" (
B
).
Disconnect from the mains.
Remove the front upper housing (
E
)
taking
care of the cable.
Remove lower panel and rear wooden panel
(
C
). Tools in tool set.
• Check oil (
F
). If oil is below minimum contact
your dealer.
• Remove any paper.
• Grease the machine.
• Check the 4 joining bolts and 2 pushing bars
for wear (
D
). If necessary inform your service
personnel.
• Mount the machine.
Maintenance work must be carried out on the
machine every 5 hours.
