3
BATTERY INSTALLATION
This product requires the following batteries (not included):
2 AA batteries - Remote
4 AA batteries - Vehicle
Remote
Control:
Using a Phillips head screwdriver, remove the screw from the battery
compartment cover on the controller. Insert the batteries, making sure to
follow the polarity (+ and -) marked on the product. Replace the battery
compartment cover and secure in place with the screw.
Vehicle:
Using a Phillips head screwdriver, remove the screw securing the battery
compartment cover on the vehicle. Push down on the battery compartment
cover and lift up. Insert the batteries, making sure to follow the polarity
(+ and -) marked on the product. Flip the battery cover down and secure in
place with the screw.
TRIMMING VEHICLE
If you notice your vehicle drifting to the left or right when you try to drive in
a straight line, adjust the Trim Direction Control dial located on the bottom of
the car by moving it left or right.
FUNCTION
Your vehicle features:
•
Sleek Micro Truck Design
• Knobby
Tires
• Great
Suspension
HOW TO DRIVE
• POWER
-
Slide the ON/OFF switch in the center of the remote control to
the ON position. The red light will illuminate to indicate that the remote
is operational. Slide the ON/OFF switch on the bottom of the vehicle to
the ON position.
•
FORWARD/BACK - Push the left controller joystick forward to move the
car forward. Push the left joystick back to move the car backwards.
•
LEFT/RIGHT - Push the right controller joystick control the right/left
direction of the vehicle.
• RANGE
-
The maximum operational distance is a radius of approximately
25 feet.
XC9987IS01EXC.indd 3
XC9987IS01EXC.indd 3
7/11/11 12:53 PM
7/11/11 12:53 PM
