SPECIFICATIONS AS415e
DIMENSIONAL DRAWING
A & E SPECIFICATIONS
One Main Street, Whitinsville, MA 01588
508 234 6158
Toll Free 800 992 5013
FAX 508 234 8251
www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
AS415e/2 pp
October 2001
Printed in USA
INDICATES MOUNTING POINT, 3/8-16 THREADED HOLE
(PI ANGLE).
INDICATES MOUNTING POINT, 3/8-16 THREADED HOLE
(NUT PLATE).
SYMBOL INDICATES CENTER OF BALANCE
FRONT
22.50
24.63
GRILLE PARTIALLY SHOWN
BACK
CL
CL
5.00
(1.50)
INPUT
4.00
19.50
11.00
509138 (0)
exp 5/14/01
TOP/BOTTOM
8.50
C
A
4.24
A
16.31
23.00
L
13.64
19.39
(16.50)
20°
SIDES
DIMENSIONS APPLY
TO BOTH SIDES
CL
4.63
16.56
18.60
20°
509138 (0)
5/14/01
The low frequency loudspeaker system shall incorporate a 15-
in LF transducer that shall be mounted in a vented enclosure
tuned for optimum LF response.
System frequency response shall vary no more than ±3 dB
from 60 to 500 Hz measured on axis. The system shall pro-
duce a Sound Pressure Level (SPL) of 97 dB SPL on axis at 1
meter with a power input of 1 Watt, and shall be capable of
producing a peak output of 130 dB SPL on axis at 1 meter.
The system shall handle 600 Watts of amplifier power (con-
tinuous) and shall have a nominal impedance of 8 Ohms.
The loudspeaker enclosure shall be trapezoidal in shape. It
shall be constructed of multi-ply, void-free, cross-grain-lami-
nated, exterior grade, Baltic birch plywood and shall employ
extensive internal bracing. It shall be finished in wear-resist-
ant textured black paint. Input connectors shall be 2-con-
tact terminal strip. Eighteen (18) 3/8"-16 threaded mount-
ing/suspension points (4 each top, bottom and sides, 2 on
back) shall be provided. The front of the loudspeaker shall be
covered with a powder coated perforated steel grille.
The low frequency loudspeaker shall be the EAW model
AS415e.
Manufacturing tolerances are +/- 0.13 and +/- 1°
