8
– SMS2124 / SMS2990
Electrical Installation
Note:
Observe all local and national codes when installing the loudspeaker.
All connections must be made with the power amplifier turned off.
The following example of a low-impedance connection uses a EAW Commercial CAZ800
amplifier. This amplifier uses a screw-terminal output.
1. Connect the A + terminal on the amplifier to the (+) screw terminal of the input
connector as shown.
2. Connect the A – terminal on the amplifier to the (–) screw terminal of the input
connector.
The loudspeakers have a nominal impedance of 8 ohms. If you connect other
loudspeakers in parallel, make sure that the overall impedance does not drop below
the minimum required by your power amplifier.
3. Plug the input connector into the
back of the loudspeaker, until it
clicks securely in place.
BREAKER
CLIP LIMIT
ON
OFF
STEREO
SUBSONIC
FILTER AT 30Hz
ON
OFF
PUSH
PUSH
AMP MODE
MONO
BRIDGE
CAUTION
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPARATUS TO RAIN OR
MOISTURE. SEE INSTRUCTIONS BEFORE USING.
INPUT
B
LINE
(BALANCED)
B (+)
B (+) B (-)
CHANNEL B BRIDGED CHANNEL A
(+)
(-) A (+) A (-)
B (--)
GND
A (--)
A (+)
INPUT
A
LINE
(BALANCED)
SERIAL / DATE CODE
INPUT
CONNECTION
MANUFACTURED IN CHINA
2004 LOUD TECHNOLOGIES INC.
"EAW" IS A REGISTERED TRADEMARK
OF LOUD TECHNOLOGIES INC.
CAZ800-AMPLIFIER
BREAKER
CLIP LIMIT
ON
OFF
STEREO
SUBSONIC
FILTER AT 30Hz
ON
OFF
PUSH
PUSH
AMP MODE
MONO
BRIDGE
CAUTION
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPARATUS TO RAIN OR
MOISTURE. SEE INSTRUCTIONS BEFORE USING.
INPUT
B
LINE
(BALANCED)
B (+)
B (+) B (-)
CHANNEL B BRIDGED CHANNEL A
(+)
(-) A (+) A (-)
B (--)
GND
A (--)
A (+)
INPUT
A
LINE
(BALANCED)
SERIAL / DATE CODE
INPUT
CONNECTION
MANUFACTURED IN CHINA
2004 LOUD TECHNOLOGIES INC.
"EAW" IS A REGISTERED TRADEMARK
OF LOUD TECHNOLOGIES INC.
CAZ800-AMPLIFIER
