Acoustic Performance Partnership
Eastern Acoustic Works
MQ1366
One Main Street, Whitinsville MA, 01588 USA • Phone 508/234-6158 • Toll Free 800/992-5013 • Fax 508/234-8251 • Web http://www.eaw.com • email [email protected]
AC
O
US
TIC
AL
PER
FORMANCE PA
RTN
ER
SH
IP
TECHNICAL SPECIFICATIONS
MQ1366
DIMENSIONAL DRAWINGS
NOMINAL DATA
Frequency Response (1 W @ 1m)
±
3 dB
190 Hz to 19 kHz
-10 dB
140 Hz
Axial Sensitivity (dB SPL, 1 Watt @ 1m)
MF
109.5
HF
112.0
Impedance (Ohms)
MF
8
HF
8
Power Handling, AES Standard (Watts)
MF
400
HF
200
Calculated Maximum Output (dB SPL)
MF Peak
141.5
HF Peak
141.0
MF Long Term
135.5
HF Long Term
135.0
Nominal Coverage Angle/-6 dB points (degrees)
Horizontal
60
Vertical
60
Recommended High-Pass Frequency
24 dB/Octave
190 Hz
ARCHITECTURAL SPECIFICATIONS
The two-way mid/high loudspeaker system shall incorporate
a 10-in cone MF transducer and a 2-in exit compression driver
HF transducer.
The MF driver shall be loaded into a midrange horn con-
structed of 3mm birch plywood reinforced with high density
polyurethane foam. The MF horn shall incorporate a phase/
displacement plug. The HF driver shall be loaded on con-
stant directivity horn with a nominal coverage pattern of
60
°
(h) x 60
°
(v). An internal passive filter network shall
provide system equalization.
System frequency response shall vary no more than
±
3 dB
from 190 Hz to 19 kHz measured on axis. The midrange fre-
quency section shall produce a Sound Pressure Level (SPL) of
109.5 dB SPL on axis at 1 meter with a power input of 1
Watt, and shall be capable of producing a peak output of
141.5 SPL on axis at 1 meter. The high frequency section
shall produce a Sound Pressure Level (SPL) of 112 dB SPL on
axis at 1 meter with a power input of 1 Watt, and shall be
capable of producing a peak output of 141 SPL on axis at 1
meter. The midrange frequency section shall handle 400 Watts
of amplifier power (AES Standard) and shall have a nominal
impedance of 8 Ohms. The high frequency section shall handle
200 Watts of amplifier power (AES Standard) and shall have
a nominal impedance of 8 Ohms.
The loudspeaker enclosure shall be trapezoidal in shape. It
shall be constructed of 15mm thickness void-free cross-grain-
laminated Baltic birch plywood and shall employ extensive
internal bracing. It shall be finished in black catalyzed poly-
urethane. Input connectors shall be 4-terminal barrier strip
and one Neutrik NL4 Speakon. A total of sixteen 3/8"-16
threaded mounting/suspension points (4 each top, bottom
and sides) shall be provided. The front of the loudspeaker
shall be covered with a powder coated perforated steel grill.
The two-way mid/high loudspeaker shall be the EAW model
MQ1366.
FRONT
SIDES
BACK
MOUNTING POINT, 3/8-16 THREADED HOLE.
510835 (0)
exp 5/2/99 dpm
MQ1366
TOP/BOTTOM
CENTER OF BALANCE.
12.00
25.61
23.28
12.16
11.91
50
°
(8.12)
5.00
L
C
32.00
GRILL PARTIALLY
SHOWN
40.00
10.57
20.00
7.38
5.63
L
C
INPUT
6.37
13.15
36.10
1.95
