manualshive.com logo in svg

EAW KF740, Руководство пользователя

Поделиться
Скачать
EAW KF740 Скачать руководство пользователя страница 18

NOTE: Note that in this application the top portion of the rear hinge will be pinned twice.  Pin hole 
1 in the AB and hole 4 through the top of the hinge tube.  

 

 
Then mount the AB7674-73 to an array of KF760 or KF761 as though it were a KF760 or KF761 
by pinning the adapter-bar into the bottom KF760/761 unit in the array using the four (4) pins 
supplied with the adapter bar. 
 

CAUTION: Consult the KF760 rigging guide for all proper safety procedures when rigging an 
array of KF760 or KF761 loudspeakers.  Rigging a KF760 array and attaching an AB7674-73 
adapter-bar with KF740 attached requires at least two people.  Improper handling of products or 
rigging procedures can cause damage to the product, personal injury, or death.

 

 

6.6.2 

Attaching a KF730 or KF737 to an array of KF740 loudspeakers 

 
It is recommended to begin the process by attaching the AB7473 adapter-bar to a KF730 or 
KF737 prior to an array of KF740 loudspeakers.  Follow steps one (1) through five (5) of section 
6.7.3 in the KF730/SB730 manual to attach a KF730 or KF737 to the AB7473.  Follow steps one 
(1) through five (5) from this manual in section 6.5.2 

Attaching a KF740 to the Fly-Bar 

to attach 

the AB7473 with KF730 or KF7373 attached to an array of KF740 loudspeakers.  
 

NOTE: Note that in this application the top portion of the rear hinge will be pinned twice.  Pin hole 
1 in the AB and hole 4 through the top of the hinge tube.  

 

 

CAUTION: Consult the KF730 manual for all proper safety procedures when rigging an array of 
KF730 or KF737 loudspeakers.  Improper handling of products or rigging procedures can cause 
damage to the product, personal injury, or death. 

 

6.7 

GROUND STACKING PROCEDURES 

Up to six KF740 loudspeakers may be ground-stacked. Always stack KF740s using the KF740 
Fly-Bar as a base for the stack. 
 

DANGER: A ground stack of more than six KF740 enclosures may shift the center of gravity 
making the stack unstable. Failure to follow this warning may result in damage to the equipment 
damage, injury, or death. 
 

 

6.7.1 

Stacking With the Fly-Bar as the Base 

IMPORTANT NOTE: If using the Fly-Bar as the base, all KF740 enclosures and the fly-bar are 
stacked upside down. 

  
Use the KF760 Ground Stack kit with the KF740 flybar.  
 

1.  Attach KF760 Ground Stack Kit to KF740 fly-bar with hardware included in kit.  Kit will 

include four (4) height adjustable legs with feet to be mounted to the front and back of the 
fly-bar oriented in the opposite direction of loudspeakers when attached to the fly-bar.   

 
CAUTION: Be sure to consult the directions included with the Ground Stack Kit.  Improper 
handling of products or rigging procedures can cause damage to the product, personal injury, 
or death. 

 
2.  At the desired stacking location, position the KF740 Fly-Bar with Ground Stack Kit on the 

floor so it is resting on its leveling feet. This will be upside down from its normal 
orientation for suspension, oriented with the corner hinge Tubes towards the audience.  

3.  Adjust the leveling feet on the Fly-Bar so the Fly-Bar sits level or at the desired angle. 

Firmly tighten the nut on each leveling foot against the Fly-Bar pad. Firmly tighten the 

Page 18 of 22   KF740 OWNER’S MANUAL 

Содержание KF740























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды