ASG Tech Note: Connecting and Communicating with DSA
Page 8 of 10
WRITE SETTINGS TO THE LOUDSPEAKER:
If you want to start clean and reset your
DSA module to factory settings, click this.
READ SETTINGS FROM THE LOUDSPEAKER:
If you are connecting to an existing
installed DSA module, need to see how a DSA is set up, or any application where
you do
not wish to erase the steering and EQ settings of your DSA,
click this.
ABORT. DON’T CONNECT.
If you are unsure about your connection, or you do not wish
to connect with that individual DSA loudspeaker, click this.
Once you click on your choice, the DSA in the ‘Unassigned Modules’ section will go
away, and you will get a green check next to where that module is assigned within the
cluster. Once all modules are assigned to a cluster, the cluster will also get a green check
next to it.
