EAVISION E-A2020, Руководство пользователя

Страница: 18 / 67

14
➢
Put the rocker and the key in the middle position, tap “ Calibrate Controller ”
in the “ Calibration ” page on the APP or toggle Channel 7 for 6 times to enter
calibration mode, the LED light will become purple and it will flash 3 times,
which means that it has entered calibration mode. Then push the corresponding
rocker or key of all channels (Channel 1-8) to make it move to the maximum
working range and repeat several times.
➢
Then tap “ Confirm ” on the APP interface or toggle Channel 7 for 6 times again
to exit calibration mode. When the LED light flashes as normal (purple light
goes out), it means the calibration is completed.
When the calibration is completed, you can check whether the setting and
calibration is correct according to the description on the APP.
Figure 7 Channel Check of the Remote Control