Eaton XV400 Скачать руководство пользователя страница 39

Страница: 39 / 80

5 Installation

5.4 Mounting

MICRO PANEL XV400 10.4"/12.1"/15"

12/2010 MN04802010Z-EN

www.eaton.com

5.4.1

Fitting the communication module in the device

The device is provided with two slots for communication modules. Optional communication modules
enable the device to be connected to automation devices (PLC, drive controls etc.) or to fieldbus
systems.

Fig. 21 Slots fitted with a communication module (A) and a slot cover (B)



Only communication modules approved by the manufacturer can be fitted. Please con-
tact your supplier.

CAUTION

Live parts in the device

Damage or destruction of components due to handling when the device is open.



Before opening the device:

De-energize the device.

Remove the power supply connector from the device.



Ensure that the device is not energized whilst it is open.



Before switching on the device:

Fit communication modules.

Fit slot covers on all slots that are not fitted with communication modules.

CAUTION

Electrostatic discharge

Electrostatic discharge may damage or destroy electronic components.



Avoid contact with components (such as connector pins) that are susceptible to
electrostatic discharge.



Discharge (by touching a grounded metal object) any static charge accumulated
in your body before touching the device.

Содержание XV400

















































































Результаты поиска

Содержание XV400

Отзывы:

Похожие инструкции для XV400

Бренды по названию

Популярные бренды

Eaton XV400, Руководство по эксплуатации

Результаты поиска

Содержание XV400

Отзывы:

Похожие инструкции для XV400

Бренды по названию

Популярные бренды