Eaton XV400 10.4", Руководство по эксплуатации

Страница: 61 / 80

7 Maintenance and service
7.2 Maintenance
MICRO PANEL XV400 10.4"/12.1"/15"
12/2010 MN04802010Z-EN www.eaton.com
61
7.2.3 Cleaning the infra-red touch
The infra-red frame must be cleaned regularly.
The infra-red channels may be interrupted if the infra-red frame is severely contaminated. In extreme
cases, this may mean that the affected zones of the touch sensor cannot be touch activated.
1 Clean the infra-red frame and the display with a clean, soft, damp cloth.

With stubborn contamination, spray a little cleaning agent onto the damp cloth first.
7.2.4 Recalibrating the infra-red touch
Devices with infra-red touch do not have to be recalibrated.
7.2.5 Battery
The integrated battery cannot be exchanged. Lifespan, see Chapter 9.4 System,  74.

The infra-red touch needs to be cleaned if the following is indicated:

On the service side, the «TOUCH ERROR» LED flashes

On the taskbar of the display, one of the following icons will appear:
: Contaminated touch sensor
: Faulty or severely contaminated touch sensor

A visualization application will show an appropriate warning.
CAUTION
Cleaning the device
Damage to the device due to the use of pointed or sharp objects or by liquids.

Do not use any pointed or sharp objects (e.g. knife) for cleaning.

Do not use any aggressive or abrasive cleaning agent or solvent.

Avoid any liquid entering the device (risk of short-circuit).