Quick Start Guide
MN0480001E
Effective February 2011
Visual Designer Development and
Runtime Software License Upgrades
Eaton Corporation
Electrical Sector
1000 Cherrington Parkway
Moon Township, PA 15108
United States
877-ETN-CARE (877-386-2273)
Eaton.com
© 2011 Eaton Corporation
All Rights Reserved
Printed in USA
MN0480001E / TN
February 2011
Eaton is a registered trademark of Eaton
Corporation.
All other trademarks are property of their
respective owners.
Boot from Internal Flash
•
The operating system is stored in an inaccessible retained mem-
ory area when operating from the internal flash of the unit. The
accessible flash memory of the unit is located in the directory \
InternalStorage\ after boot up. Application and retained files can
be stored in this directory.
To perform a version change of the operating system the operat-
ing system image (file XV102.BIN) must be copied to the directory
\InternalStorage\OS\ on the XV. After this the change to the oper-
ating system in the Windows CE environment can be completed
by a reboot of the unit.
After reboot if a valid operating system is not found in \
InternalStorage\OS\, the unit will start with the compact firmware-
OS. With the compact firmware-OS only a few necessary settings
and services are offered. Applications like Visual Designer or PLC
can not be run if only the compact firmware-OS is running.
Boot from SD-Card
•
With every startup of the XV unit the operating system is loaded
from the SD-card and then started. The operating system image
(XV102.BIN) has to be stored in the directory \OS\ on the SD-card.
By replacing the operating system image file on the SD-card and
restarting the unit, the operating system may be changed.
