manualshive.com logo in svg

Eaton xComfort F94 Series, Руководство по сборке

Поделиться
Скачать
Eaton xComfort F94 Series Скачать руководство пользователя страница 6

6

3. Manual operation: 

Manual operation of switching actuator, dimming 
actuator

1. Press the configuration pushbutton with a screwdriver 
    longer than 2 sec => actuator enters manual mode for  
    10 sec, the LED flashes fast 
2. Press the configuration pushbutton with a screwdriver for less than 0.5 sec => Lamp (LED) is on 
3. Press the configuration pushbutton with a screwdriver for less than 0.5 sec => Lamp (LED) is off 
4. The actuator leaves automatically the manual mode 

Manual operation of the Shutter actuator

1. Press the configuration pushbutton with a  
    Screwdriver for longer than 2 sec => actuator enters 
    the manual mode for 10 sec the LED flashes fast 
2. Press the configuration pushbutton with a screwdriver for less than 0.5 sec => Shutter moves up 
3. Press the configuration pushbutton with a screwdriver for less than 0.5 sec => Shutter moves down 
4. After 10 sec the actuator leaves automatically the manual mode 

4. Reset actuator

1. Press the configuration pushbutton with a screwdriver for less  
    than 0.5 sec => actuator enters teach-in mode, the LED in the  
    actuator lights 
2. Press and hold the configuration pushbutton with a screwdriver  
    until LED has flashed 5 times   
3. The actuator leaves teach-in mode automatically after a few seconds 

Содержание xComfort F94 Series









Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды