PLACING THE FUSES IN THE SWITCHGEAR
Switch on the earth switch and open
the switchgear front cover.
Press to the locking latch then turn the
fuse plug to the left.
Remove the plug inside the fuse holder
from the housing.
After placing the fuse plug into the
shell, rotate right and place the pawls
on the shell to the housing on the
shell tube.
After placing the MV fuse into the
shell, place it in the shell by fixing the
fuse plug.
Assemble the MV fuse by placing it in a
way that the arrow directs inside the fuse
plug. Ensure that its clamp is tight.
Check if the fuse blow assembly on
the fuse plug is on the arrow direction
according to the plastic piece.
If the warning lights on the signal
light box are on, reset the situation by
pressing delete button and complete
the procedure.
Close the switchgear door after
finishing the procedure.
Ulusoy URING36 - LLF - 3 Way Compact Switchgear with Fuse User Manual
May 2020 www.eaton.com
17
