Eaton Ulusoy URING12-24-LLC-SF6, Руководство пользователя

Страница: 3 / 26

1. CAUTION
When medium-voltage equipment is operating,
certain components are live, other parts may be in
movement and some may reach high temperatures.
Therefore, the use of this equipment poses
electrical, mechanical and thermal risks.
Consequently, the equipment to which the present
manual refers complies with the requirements
of section 11.2 of Standard IEC 62271-1. It must
therefore only be operated by appropriately
qualified and supervised personnel, in accordance
with the requirements of standard EN 50110-1 on
the safety of electrical installations and standard
EN 50110-2 on activities in or near electrical
installations.
Personnel must be fully familiar with the
instructions and warnings contained in this
manual and in other recommendations of a more
general nature which are applicable to the situation
according to current legislation.
The above must be carefully observed, as the
correct and safe operation of this equipment
depends not only on its design but also on general
circumstances which are in general beyond the
control and responsibility of the manufacturer. More
specifically:
• The equipment must be handled and transported
appropriately from the factory to the place of
installation.
• All intermediate storage should occur in
conditions which do not alter or damage the
characteristics of the equipment or its essential
components.
• Service conditions must be compatible with the
equipment rating.
• The equipment must be operated strictly in
accordance with the instructions given in the
manual, and the applicable operating and safety
principles must be clearly understood.
• Maintenance should be performed properly, taking
into account the actual service and environmental
conditions in the place of installation.
The manufacturer declines all liability for any
significant indirect damages resulting from violation
of the guarantee, under any jurisdiction, including
loss of income, stoppages and costs resulting from
repair or replacement of parts.
Warranty
The manufacturer guarantees this product against any defect in materials and operation during the
contractual period. In the event that defects are detected, the manufacturer may opt either to repair or replace
the equipment. Improper handling of this equipment and its repair by the user shall constitute a violation of
the guarantee.