13
Operation
Transmission Power Take Off (PTO)
UltraShift
PLUS
Multipurpose Vocational Extreme Performance (VXP)
FO-22E31
8
A-VXP Military Application Extreme Heavy Haul Only
The ability to prevent a mode selection while the PTO is active is desired for
certain vocational applications.
A PTO configuration is available that allows or prevents a non-neutral mode
selection when a PTO is active. The default setting for this configuration is
“Disabled” which allows non-neutral mode selection and mobile operation
when the PTO is active. When set to “Enabled” and the PTO is active, non-neu-
tral mode selections and mobile operation is not allowed.
Stationary PTO Operation
The transmission countershaft PTO is used in this application.To engage the
PTO for stationary operation, perform the following steps:
1.
Apply the parking brake.
2.
Depress the service brake.
3.
Select “D” on the Shift Control. (This stops countershaft rotation for
PTO engagement.)
4.
Select the transmission PTO switch.
5.
Select “N” on the Shift Control.
6.
Release the service brake to engage the clutch and the PTO.
7.
Raise engine speed as required to operate PTO.
Note:
To disengage the PTO, deselect the transmission PTO switch.
