Eaton STS 2000A, Инструкция по установке и эксплуатации

Страница: 105 / 120

Eaton Static Transfer Switch 2000A 3-Pole Installation and Operation Manual 164001127—Rev 01 89
1166..22 A Annaalloogg S Sccrreeeenn P Pooiinnttss
16.2 Analog Screen Points lists the Analog Points as they show on the screen.
The same point name is used when the point appears on the Analog Values Screen, the Event Log Screen, or
the Alarms Screen.
The normal range measurement bracket for each point is given in the Low Alarm Index and High Alarm Index,
which are not indexed contiguously with the point, but in adjacent tables following the list of points.
Point values may be scaled as shown in the Value Scale column. For example, for “Output %KVA A” (point 34)
a 68% measurement is listed as 68, not 0.68.
Custom STSs can have different points and the standard points list may not apply.
Table 7. Analog Screen Points
Name Units Value
Index Value Scale Low Alarm
Index High Alarm
Index
S 1 Volts AB Volts
1
None 161 532
S 1 Volts BC Volts 2 None 162 533
S 1 Volts CA Volts 3 None 163 534
S 2 Volts AB Volts 4 None 164 535
S 2 Volts BC Volts
5
None
165 536
S 2 Volts CA Volts 6 None 166 537
Output Volts AB Volts
7
None 167 538
Output Volts BC Volts 8 None 168 539
Output Volts CA Volts 9 None 169 540
Output Amps A Amps 10 None 170 541
Output Amps B Amps 11 None 171 542
Output Amps C Amps 12 None 172 543
Output Amps N Amps 13 None 173 544
Output KVA A KVA 14 None 174 545
Output KVA B KVA 15 None 175 546
Output KVA C KVA 16 None 176 547
S 1 A Amps Amps
17
None
177 548
S 1 B Amps Amps 18 None 178 549
S 1 C Amps Amps 19 None 179 550
S 2 A Amps
Amps 20 None 180 551
S 2 B Amps Amps 21 None 181 552
S 2 C Amps Amps 22 None 182 553
Digital and Analog Points