![background image](http://html1.mh-extra.com/html/eaton/sefelec-1000-m/sefelec-1000-m_user-manual_526968036.webp)
User manual SEFELEC 5x Series
35
v1.06
Position the brackets on each side of the device as in the drawing and secure with the 4 screws.
See below:
4 - Fitting the bay kit: Fit the 2 runners, adjust them in height according to the equipment to be
installed in the bay.
5 - Install the device on the runners and slide it so that the 2 brackets on the rails of the bay on
the front panel are abutting. Then fix the device to the bay with the screws in the kit.
In the case of a device with the outputs in the rear face. Provide a deeper bay of 800 mm mini-
mum.
NOTE
The air inlets of the device must be clear. The dimensions of the bay as
well as the mounting of the device must allow the movement of air
around it in order to ensure a maximum operating temperature of 45°C.
Содержание SEFELEC 1000-M
